Jolt squeeze moulding machine for casting

The Jolt Squeeze Moulding Machine is suitable for batch production of single sided pattern plate and single flask moulding of small castings,can make cope flask and drag flask.The Jolt Squeeze Moulding Machine own simple air control system,easy operation,flexible use and convenient repair and maintenance.The Jolt Squeeze Moulding Machine Special FeaturesThe Jolt Squeeze Moulding Machine Noise ControlledThe Jolt Squeeze Moluding Machine Combined Jolt SqueezeThe Jolt Squeeze Moluding Machine Accurate Centreline DrawThe Jolt Squeeze Moluding Machine Variable Jolt TimersThe Jolt Squeeze Moluding Machine Operational Roller on Pin Lift DrawThe Jolt Squeeze Moluding Machine Operational Safety GuardsThe Jolt Squeeze Moulding Machine Work principleThe worktable fall and collide with floating shock-iron,and the sand was tighted slightly, and then to compaction,get the top and bottom of sand mould are tight. The slightly shock is high frequency (500-1000 times/min), small amplitude (5-25 mm) vibration instead of low frequency (60-120 times/min), the large amplitude vibration. The Jolt Squeeze Molding Machine made of sand mold are good quality, the basic requirement is also lower.The Jolt Squeeze Moulding Machine Work Technical ParametersItemUnitZ144Max dimension of flaskmm500×400×180Worktable dimensionmm560×465Air pressureMpa0.6Compressive strengthKN42Jolting loadKN2.6Compacting strokemm120Draw strokemm150Distance between worktable to pressure headmm170-190ProductivityMould/h40-60